What type of study is this?

This is a Experimental Study study.

September 30, 2025

Structure and mechanical properties of corrosion- and heat-resistant alloy produced by selective laser melting

PMP. G. MinKurchatov Institute VVV. E. VadeevKurchatov Institute ДСД. И. СуховKurchatov Institute

Key Points

VZHL939 alloy exhibits enhanced tensile properties compared to EP648 and VZH159 alloys produced by SLM.
Microstructure analysis reveals specific details of γ'-phase particles and carbides during post-processing.
The study incorporates results from various treatments like hot isostatic pressing and heat treatment.
Creep rupture tests demonstrate the advantages of VZHL939's performance under stress conditions.

Abstract

The microstructure investigation results of the corrosion- and heat-resistant alloy VZHL939 at different post-processing stages are presented. Morphology of γ'-phase particles and carbides after the processes of selective laser melting (SLM), hot isostatic pressing (HIP), heat treatment and the creep rupture test is described. The advantages concerning the tensile and creep properties of VZHL939 as compared with ones of EP648 and VZH159 alloys produced by the SLM method are shown.

اسأل الذكاء الاصطناعي

Bookmark

View Full Paper

Cite This Study

Min et al. (Fri,) studied this question.

synapsesocial.com/papers/68dc27558a7d58c25ebb3c70 https://doi.org/https://doi.org/10.31044/1684-579x-2021-0-12-3-10

Also Consider

Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context:

اسأل الذكاء الاصطناعي

Bookmark

View Full Paper