Key points are not available for this paper at this time.
Abstract Background Time is a critical factor of plasma lactate testing in the management of patients with sepsis. To best serve these patients, we must optimize testing methods to provide a turnaround time (TAT) that guides efficient patient care. Point of care tests (POCTs) provide rapid results for emergency department and medical intensive care unit but are not feasible for all hospital settings. Laboratory testing methods on an automation line provide greater efficiency but result slowly due to need of specimen preparation and longer analytical time. The goal of this study is to provide detailed TATs of plasma lactate testing among the methods of POCT, chemistry analyzer in an automation line, and blood gas analyzer. Methods Plasma lactate testing was performed by three methods, GEM Premier ChemSTAT (POCT in ER only), Beckman AU5800 (chemistry analyzer), and Radiometer ABL800 (blood gas instrument). The TAT of lactate for each method was measured and include the time from specimen collection to laboratory receipt (except for POCT method), and time from specimen receipt to resulting (including specimen preparation for Beckman AU5800). Results The average TATs of lactate testing for each method in all hospital sites are detailed with respect to each event and subcategorized (Table 1). The average TAT of 12.0 min on Radiometer ABL800 is higher than the TAT of 2.5 on GEM Premier ChemSTAT method but is greatly reduced compared to the TAT of 35.4 min on Beckman AU5800. Conclusions Radiometer ABL800 method could be the optimal laboratory method for plasma lactate testing fulfilling the TAT (average 12 min), with less test cancellation due to specimen stability issue, and combines testing with blood gases. Using three Radiometer ABL800 instruments, we manage the performance of around 70 plasma lactate tests daily.
Lockart et al. (Tue,) studied this question.