Key points are not available for this paper at this time.
Abstract: The study examined the viability of using waste supplementary cementing materials (SCMs), such as fly ash (FA) and silica fume (SF), as partial replacement of Ordinary Portland cement. The way SCC's fresh properties and hardened were impacted by FA and SF. The study examined the fresh characteristics and hardened characteristics of various distinct SCC mixes using SCC with partial replacement of Ordinary Portland Cement with FA (class F) and SF. First, the cement was replaced by percentages in the mixes 0%, 10%, 15%, 20%, 25%, and 30% by FA and constant replacement of 10% by SF. Then cement was replaced by percentages in the mix with 25% FA constant and 4%, 6%, 8%, 10%, and 12% by SF. For every combination, the water/binder (w/b) ratio was set at 0.43. The EFNARC (Specification and Guidelines for Self-Compacting Concrete) standards were met by the slump flow, T50, and viscosity of the SCC. After 28 days of curing, the blend consisting of 65% PC, 25% FA, and 10% SF had a maximum compressive strength of 41.22 MPa which is 12.07% greater than the compressive strength of the control specimen which is 36.78 MPa. The Split Tensile Strength of the same blend is 4.37% is greater than the control specimen. Non-destructive tests were also performed after 28 days of curing and the regression equations give the excellent relationship between Rebound Number, Ultrasonic Pulse Velocity, and Compressive Strength. This is due to the formation of the proper matrix as the particle size of SF and FA is less than that of cement and the free lime of cement reacts with FA and SF to form C-S-H gel which provides strength.
Shukla et al. (Sat,) studied this question.