Key points are not available for this paper at this time.
Construction in cities and agglomerations is one of the main sources of air pollution in most countries in the world. Fine dust particles, PM0.5–PM10, which form as a result of construction processes, are among the most dangerous pollutants. With the increase in the volume of point-pattern housing development in cities, the task of maintaining clean air and environmental conditions becomes important. This requires research, the monitoring of dust emissions throughout the entire construction period and the development of design solutions based on the results obtained. The study examines the determination of the dispersed composition of dust generated on a construction site. A graphical representation of the dispersed composition is given by constructing integral curves on a logarithmic grid and approximating them using two-link and three-link splines. The gravimetric measurement method was used to analyze the concentration of dust in the air released during construction work near residential areas. Dust analysis at the construction site revealed significant differences in particle size that cannot be explained by statistical errors alone. The reasons for this are both working conditions and climatic factors, including humidity and wind intensity. In this regard, it is preferable to use models that take into account random processes instead of traditional deterministic methods to study the dust that shapes during construction.
Svetlana Manzhilevskaya (Fri,) studied this question.