Key points are not available for this paper at this time.
Mechanical damage of LiMn2O4 active material caused by volume change, phase transition, and lithium diffusion-induced stress is the main degradation mechanism in lithium-ion batteries. Young's modulus is a key parameter of mechanical property, and its variation with lithium content x or state of charge (SOC) at the nanoscale is an important issue because such variation may have influences on the stress level and lithium-ion transport. In this study, we successfully developed bimodal atomic force microscopy (bimodal AFM) and related approaches to carry out surface topography imaging and Young's modulus mapping of LixMn2O4 nanosized particles. It was validated that the size of particles decreased with decreasing SOC due to delithiation during the charging cycle. The variation in Young's modulus with SOC was quantitatively determined using the silicon material as a reference, and the trend of the variation is consistent with the reported results of molecular dynamics simulation. Furthermore, spatially nonuniform distribution of Young's modulus on the nanosized particle surface was found even upon completion of charging. This phenomenon could be attributed to the coexistence of two phases during the charging process. Our experimental study reveals the correlation between Young's modulus of LiMn2O4 and SOC at the nanosized particle level, and we believe that the bimodal AFM will be widely used in the nanocharacterization of the electrode materials because lithium content- or SOC-dependent mechanical properties are common in battery electrode materials.
Lou et al. (Thu,) studied this question.