Bed Roughness Incorporated Lift Force Formulation for Sediment Concentration Solutions

Within the field of sediment transport dynamics, there is an emphasis on the need for providing and improving simplified analytical solutions from which the findings can be extended upon. Typically, solutions have been developed from the understanding and incorporation of vertical velocity components/distribution; however, there remains opportunity for analytical enhancement. Under uniform open channel dilute sediment laden flow conditions, the type II concentration profile reflects the maximum concentration at a distance from the bed. To analytically depict the type II profile, it is essential to describe the vertical velocity components acting within the flow hydrodynamics. Yet, the impact of bed roughness on the vertical velocity distribution influencing a sediment particle has not been articulated. Hence, in this research, the impact of bed roughness is incorporated into the vertical velocity distribution to formulate the lift force acting upon a particle, to provide a sediment concentration solution. The proposed analytical vertical velocity distribution solution is validated against existing formulations, followed by the proposed sediment concentration being validated against existing solutions. Here, the results indicate that analytically incorporating the bed roughness alongside the secondary current induced vortices provides a lift force solution that can depict the type II concentration profile. Under relatively low shear velocity, increasing the sediment diameter allows for a clearer depiction of the near surface region and profile curvature. Furthermore, the proposed sediment concentration solution can accurately depict the near surface region, curvature of concentration, and maximum concentration under relatively large shear velocity data. Importantly, under conditions where both the shear velocity and sediment diameter are relatively large, the maximum concentration is captured with greater accuracy; however, the curvature of the profile and the near surface region accuracy are hindered. It is to be noted, that due to the formulation of the proposed velocity distribution the accuracy of the solution towards the bed decreases due to instability caused as the characteristic depth decreases to zero.