Key points are not available for this paper at this time.
Abstract Confocal laser scanning microscopy (CLSM) stands out as one of the most widely used microscopy techniques thanks to its three-dimensional imaging capability and its sub-diffraction spatial resolution, achieved through the closure of a pinhole in front of a single-element detector. However, the pinhole also rejects useful photons, and beating the diffraction limit comes at the price of irremediably compromising the signal-to-noise ratio (SNR) of the data. Image scanning microscopy (ISM) emerged as the rational evolution of CLSM, exploiting a small array detector in place of the pinhole and the single-element detector. Each sensitive element is small enough to achieve sub-diffraction resolution through the confocal effect, but the size of the whole detector is large enough to guarantee excellent collection efficiency and SNR. However, the raw data produced by an ISM setup consists of a 4D dataset, which can be seen as a set of confocal-like images. Thus, fusing the dataset into a single super-resolved image requires a dedicated reconstruction algorithm. Conventional methods are multi-image deconvolution, which requires prior knowledge of the system point spread functions (PSFs), or adaptive pixel reassignment (APR), which is effective only on a limited range of experimental conditions. In this work, we describe and validate a novel concept for ISM image reconstruction based on autocorrelation inversion. We leverage unique properties of the autocorrelation to discard low-frequency components and maximize the resolution of the reconstructed image without any assumption on the image or any knowledge of the PSF. Our results push the quality of the ISM reconstruction beyond the level provided by APR and open new perspectives for multi-dimensional image processing.
Ancora et al. (Mon,) studied this question.