Key points are not available for this paper at this time.
With the development of lithium-ion batteries and fuel cells, the application of hybrid power systems is becoming more and more widespread. To better optimize the energy management problem of fuel cell hybrid systems, the accuracy of system modeling and simulation is very important. The hybrid system is formed by connecting the battery to the fuel cell through an active topology. Digital twin technology is applicable to the mapping of physical entities to each other with high interactivity and fast optimization iterations. In this paper, a relevant model based on mathematical logic is established by collecting actual operational data; subsequently, the accuracy of the model is verified by combining relevant operating conditions and simulating the model. Subsequently, a three-dimensional visualization model of a hybrid power system-based sightseeing vehicle and its operating environment was established using digital twin technology to improve the model simulation of the fuel cell hybrid power system. At low speeds, the simulation results of the hybrid power system-based sightseeing vehicle have a small error compared with the actual running state, and the accuracy of the data related to each internal subcomponent is high. In the simple interaction between the model display vehicle and the environment, the communication state can meet the basic requirements of the digital twin model because the amount of data to be transferred is small. This study makes a preliminary attempt at digital parallelism by combining mathematical logic with visualization models and can be used as a basis for the subsequent development of more mature digital twin models.
Kang et al. (Fri,) studied this question.