Automatic Zebra Crossing Using Raspberry PI

The Automatic Zebra Crossing project enhances pedestrian safety and convenience at zebra crossings using an Atmega8 microcontroller board, a time display, and Progisp software. The project features a pair of automatic gates positioned at both ends of the zebra crossing, closing whenever the traffic signal turns red to stop vehicles. This closure effectively restricts pedestrian movement beyond the zebra crossing area, ensuring enhanced safety. The system works like an automatic stairway, with the gates being opened or closed depending on the condition of the traffic signal. As the central control device, the Atmega8 microcontroller board processes inputs from the traffic signal and generates control signals to open and close the gates. The time display tells pedestrians how much time is left until they can cross in real time. The Atmega8 microcontroller is programmed using the Progisp software, allowing the construction of the control logic and synchronization with the traffic signal. The software enables the microcontroller to work seamlessly with the gate motors and the time display. The Automatic Zebra Crossing system dramatically improves pedestrian safety by keeping people inside the crossing area when the light is red. This system uses gates for straying, lowering accident rates, and optimizing traffic flow. The project documentation outlines the software implementation with Progisp and explains the hardware setup. This setup involves an Atmega8 microcontroller board, gate motors, and a time display. The code integrates a control logic for synchronization.Hardware Requirement:  Raspberry Pi- Pico  Mobile Wi-fi Module  Power Supply Unit  Motor Unit  Relay Unit  Software Requirement:  Python  PC  Web page