Session 24. Oral Presentation for: Geomechanical risk assessment of injection test for a carbon storage site appraisal, offshore Northern Territory

Presented on Thursday 23 May: Session 24 A geomechanical study has been conducted to assess the risk of formation fracturing and sanding during a water injection test. Considering the temperature difference between the storage formation and the injection fluid, the cooling effects could lead to a reduction of almost 15% in fracture initiation pressure (FIP). Notably, the FIP for perforations aligned with the maximum horizontal stress direction are lower than the minimum horizontal stress. While injection pressures surpassing FIP might trigger tensile fracturing in specific perforations, fracture propagation from the wellbore remains unlikely if the injection pressure remains below the field’s minimum horizontal stress. The pressure requirements for current envisaged matrix injection rates fall below the estimated FIPs. Consequently, the risk of formation fracturing during the injection test is deemed low. The propensity of sanding during flowback, considering a range of rock weakening and thermal effects of water injection, is also found to be low. To access the Oral Presentation click the link on the right. To read the full paper click here