Key points are not available for this paper at this time.
Abstract As the risk of accidental explosions at ammunition storage or hydrogen charging station increases in populated area, it is needed to design the facilities against blast loading, particularly subjected to partially confined explosion. However, the partially confined explosion lacks experimental test data to efficiently design the facilities subjected to the potential threat, when compared to unconfined or confined explosion cases. As a fundamental study on partially confined explosion, two partially buried tunnel-type structures with normal- and high-strength concretes were tested under a weight charge of 5.9 kg TNT explosion. The major parameters were concrete compressive strength and reinforcement ratio. The test result showed that the damage of the concrete structure with normal-strength concrete was extremely severe, whereas that of the specimen with high-strength was relatively mild. Further, finite element (FE) analyses were performed to investigate the confinement effect of blast load. The FE analysis result showed that under partially confined explosion, the reduction of the maximum displacement by using higher concrete strength was significant, while preventing the failure of the structure. This study provides fundamental data for designing the facilities with explosives subjected to the partially confined explosion.
Park et al. (Wed,) studied this question.