Optimization of waveguide fabrication processes in lithium-niobate-on-insulator platform

Lithium niobate (LN) is used in diverse applications, such as spectroscopy, remote sensing, and quantum communications. The emergence of lithium-niobate-on-insulator (LNOI) technology and its commercial accessibility represent significant milestones. This technology aids in harnessing the full potential of LN’s properties, such as achieving tight mode confinement and strong overlap with applied electric fields, which has enabled LNOI-based electro-optic modulators to have ultra-broad bandwidths with low-voltage operation and low power consumption. As a consequence, LNOI devices are emerging as competitive contenders in the integrated photonics landscape. However, the nanofabrication, particularly LN etching, presents a notable challenge. LN is hard, dense, and chemically inert. It has anisotropic etch behavior and a propensity to produce material redeposition during the reactive-ion plasma etch process. These factors make fabricating low-loss LNOI waveguides (WGs) challenging. Recognizing the pivotal role of addressing these fabrication challenges for obtaining low-loss WGs, our research focuses on a systematic study of various process steps in fabricating LNOI WGs and other photonic structures. In particular, our study involves (i) careful selection of hard mask materials, (ii) optimization of inductively coupled plasma etch parameters, and finally, (iii) determining the optimal post-etch cleaning approach to remove redeposited material on the sidewalls of the etched photonic structures. Using the recipe established, we realized optical WGs with a total (propagation and coupling) loss value of −10.5 dB, comparable to established values found in the literature. Our findings broaden our understanding of optimizing fabrication processes for low-loss lithium-niobate WGs and can serve as an accessible resource for advancing the LNOI technology.