Key points are not available for this paper at this time.
A hydrokinetic turbine with a vertical axis is specifically designed to harvest the kinetic energy from moving water. In this study, three vertical axis water turbines, namely Gorlov, Darrieus, and Savonius turbines, were compared for their efficiency via numerical modeling for steady-state conditions via the ANSYS 2022 R2 Fluent model. The Semi-Implicit Method for Pressure-Linked Equations (SIMPLE) was implemented with an SST k-ω turbulence model. The dynamic mesh technique, which allows modeling according to changes in angular velocity at each time step, was used to simulate flow around the turbines for six different velocities (from 0.5 to 3 m/s). The efficiency of the turbines was compared and the results were analyzed. The pressure, velocity, and turbulence kinetic energy distributions around the rotor were measured at different rotational angles and results indicated a wider operating range for the Darrieus and Gorlov turbines compared to the Savonius turbine. The highest power coefficient of 0.293 was achieved in the model featuring a Darrieus turbine, corresponding to a TSR value of 1.34, compared to 0.208 for the Gorlov and 0.257 for the Savonius turbine, at TSR values of 1.3 and 1.06, respectively. Numerical modeling results pointed to a significantly higher self-starting capacity for the Savonius turbine compared to the others.
Karakaya et al. (Thu,) studied this question.