Key points are not available for this paper at this time.
Currently, the global energy revolution in the direction of green and low-carbon technologies is flourishing. The large-scale integration of renewable energy into the grid has led to significant fluctuations in the net load of the power system. To meet the energy balance requirements of the power system, the pressure on conventional power generation units to adjust and regulate has increased. The efficient utilization of the regulation capability of controllable industrial loads and energy storage can achieve the similarity between renewable energy curves and load curves, thereby reducing the peak-to-valley difference and volatility of the net load. This approach also decreases the adjustment pressure on conventional generating units. Therefore, this paper proposes a two-stage optimization scheduling strategy considering the similarity between renewable energy and load, including energy storage and industrial load participation. The combination of the Euclidean distance, which measures the similarity between the magnitude of renewable energy–load curves, and the load tracking coefficient, which measures the similarity in curve shape, is used to measure the similarity between renewable energy and load profiles. This measurement method is introduced into the source-load-storage optimal scheduling to establish a two-stage optimization model. In the first stage, the model is set up to maximize the similarity between renewable energy and the load profile and minimize the cost of energy storage and industrial load regulation to obtain the desired load curve and new energy output curve. In the second stage, the model is set up to minimize the overall operation cost by considering the costs associated with abandoning the new energy sources and shedding loads to optimize the output of conventional generator sets. Through a case analysis, it is verified that the proposed scheduling strategy can achieve the tracking of the load curve to the new energy curve, reducing the peak-to-valley difference of the net load curve by 48.52% and the fluctuation by 67.54% compared to the original curve. These improvements effectively enhance the net load curve and reduce the difficulty in regulating conventional power generation units. Furthermore, the strategy achieves the full discard of renewable energy and reduces the system operating costs by 4.19%, effectively promoting the discard of renewable energy and reducing the system operating costs.
Wang et al. (Fri,) studied this question.