Key points are not available for this paper at this time.
Abstract Ancient landslides tend to reactivate along pre‐existing slip zones that have reached a residual state. On the eastern margin of the Tibetan Plateau, previous research has indicated that the slip zone of ancient landslides is primarily composed of clayey soil with gravel, known as gravelly slip zone soil. However, the relationship between the macromechanical behavior of gravelly slip zones and the mesostructure of the shear surfaces affected by gravel is still unclear. Herein, ring shear tests and reversal direct shear tests were performed on gravelly slip zone soil, and the 3D morphology and shear surface roughness were quantitatively characterized by using 3D laser scanning technology and the power spectral density method. The results showed a significant correlation between the friction coefficient of the shear surface and its roughness. Gravel played a crucial role in influencing the macromechanical behavior of slip zones by altering the mesomorphology of the shear surfaces. By analyzing the mechanical properties of the contact unit on the shear surface, the residual strength of the gravelly slip zone was found to be jointly controlled by the basic strength of the fine‐grained soil and the undulations caused by the gravel. Finally, a residual strength model was developed for the gravelly slip zone considering both the strength of the fine‐grained soil and the shear surface roughness caused by the gravel.
Ren et al. (Fri,) studied this question.