Mathematical Modeling for the Optimal Cost Design of Circular Isolated Footings with Eccentric Column

This article shows a model for the design of circular isolated footings and the column placed anywhere in the footing under minimum cost criteria. Some designs for obtaining the diameter, effective depth, and steel areas of the footing under biaxial bending assume the maximum and uniform pressure at the bottom of the footing supported on elastic soils. All these works consider the column placed at the center of the footing. Three numerical problems are given (each problem presents four variants) to determine the lowest cost to design the circular footings under biaxial bending. Problem 1: Column without eccentricity. Problem 2: Column with eccentricity in the direction of the X axis of one quarter of the diameter of the footing. Problem 3: Column placed at the end furthest from the center of the footing on the X axis. The results are verified by the balance of moments, one-way shear or shear and two-way shear or punching. The new model shows a saving of 17.92% in the contact area with soil and of 31.15% in cost compared to the model proposed by other authors. In this way, the proposed minimum cost design model for circular footings will be of great help for the design when the column is placed on the center or edge of the footing.