Key points are not available for this paper at this time.
The application of polymer materials in concrete structures is widespread and effectively used. However, there is a lack of a systematic knowledge base about the structure formation and properties of variatropic vibrocentrifuged modified fiber-reinforced concrete. The purpose of this work is the investigation of the influence of polypropylene (PF) and basalt fiber (BF) and modification with microsilica (MS) on the properties of variatropic concretes obtained using the synthesized vibration centrifugation technology. Test samples were made using vibration centrifugation technology, followed by sawing. Various types of fiber reinforcement were studied, both individually and in combination. To determine the degree of effectiveness of each recipe solution, the following main characteristics were monitored: the density and workability of concrete mixtures; the density of hardened composites; compressive strength (CS); bending strength (BS); water absorption (WA). In variatropic vibrocentrifuged concrete, the greatest efficiency is achieved with dispersed BF reinforcement in an amount of 1.5%. Compared to the control composition, the increase in CS was 8.50%, the increase in BS was 79.17%, and WA decreased by 27.54%. With PF reinforcement, the greatest effect was recorded at a dosage of 1.0%. The increase in CS was 3.16%, the increase in BS was 10.42%, and WA decreased by 17.39%. The MS modification showed the best effect with 8% replacement of part of the Portland cement. The increase in CS was 17.43%, the increase in BS was 14.58%, and WA decreased by 33.30%. The most effective and economically rational formulation solution for vibrocentrifuged concrete is combined fiber reinforcement in combination with the MS modification in the following quantities: BF—1.0%; PF—0.5%; MS—8%. The increase in CS was 22.82%, the increase in BS was 85.42%, and WA decreased by 37.68%.
Shcherban’ et al. (Tue,) studied this question.