A Machine Learning Approach to Wrist Angle Estimation Under Multiple Load Conditions Using Surface EMG

Surface electromyography (sEMG) is widely used for decoding motion intent in prosthetic control and rehabilitation, yet the impact of external load on sEMG-to-kinematics mapping remains insufficiently characterized, particularly for wrist flexion-extension This pilot study investigates wrist angle estimation (0–90°) under four discrete counter-torque levels (0, 25, 50, and 75 N·cm) using a multilayer perceptron neural network (MLPNN) regressor with mean absolute value (MAV) features. Multi-channel sEMG was acquired from three healthy participants while performing isotonic wrist extension (clockwise) and flexion (counterclockwise) in a constrained single-degree-of-freedom setup with potentiometer-based ground truth. Signals were filtered and normalized, and MAV features were extracted using a 200 ms sliding window with a 20 ms step. Across all load levels, the within-subject models achieved very high accuracy (R2 = 0.9946–0.9982) with test MSE of 1.23–3.75 deg2; extension yielded lower error than flexion, and the largest error was observed in flexion at 25 N·cm. Because the cohort is small (n = 3), the movement is highly constrained, and subject-independent validation and embedded implementation were not evaluated, these results should be interpreted as a best-case baseline rather than evidence of deployable rehabilitation performance. Future work should test multi-DoF wrist motion, freer movement conditions, richer feature sets, and subject-independent validation.