In the loess region, the hydraulic properties of the loess, used as either surrounding rock, backfilling or geoplomer material, are significant for engineering construction and agriculture development projects. This work investigated the soil-water characteristic curves (SWCC) of the undisturbed and remolded loess during the drying process using the tensiometer and psychrometer method. Based on the test results, SWCC was fitted using the Van Genuchten, and Fredlund and Xing models. Moreover, the permeability was comparatively calculated by the Childs and Collis-George, Van Genuchten, and Fredlund models, respectively. Results revealed that the SWCC of both the undisturbed and remolded loess exhibited three-stage characteristics in the relationship between the logarithmic matric suction and moisture, including the boundary effect zone, transition zone, and residual zone. The corrected Fredlund and Xing model provided an optimal calculation for the SWCC of the loess, while the Van Genuchten model showed suction deviations of about 103 kPa. Meanwhile, the undisturbed loess had a low water retention at the low (<103 kPa) suction range, which was attributed to the large pore structure of the undisturbed loess that reduces the air-entry value. This research clarified the differences in the water retention and permeability properties of the loess, providing a theoretical foundation for evaluating the hydraulic properties of the loess.
Li et al. (Fri,) studied this question.