One of the major topics in the modern automotive industry is reducing emissions and increasing the mileage range. To tackle this challenge, on the one hand, modifying the powertrain system is a possibility, and on the other hand, lightweight design offers various possibilities. Multi-Material Design (MMD) involves designing car bodies that combine different materials that require joining. Given the variety of materials, mechanical joining processes are preferred. Especially the current development of the Giga/Mega-casting process concerning aluminium casting and the subsequent mechanical joining illustrates the challenges of this material group. In car production, aluminium castings are mainly made from aluminium-silicon (AlSi) alloys. Ultimately, the alloy system's insufficient ductility leads to crack initiation during mechanical joining. Cast parts are therefore often used in areas of the car body that are exposed to high-pressure loads. For example, self-piercing riveting (SPR) is used due to its high load-bearing capacity. In this study, improved joinability is demonstrated by influencing the microstructure through tailored solidification rates and a developed heat-treatment chain strategy adapted for hypoeutectic AlSi systems. Data on microstructure, mechanical, and joining properties are used to develop a solidification-joining correlation for the SPR process across a range of Si contents and solidification rates. The purpose is to develop the ability to produce suitable aluminium castings with sufficient joinability, thereby improving versatility.
Neuser et al. (Thu,) studied this question.