Key points are not available for this paper at this time.
Improving the long-term cycling stability of solid-state lithium (Li)-metal batteries (SSBs) is a severe challenge because of the notorious solid-solid interfacial contact loss originating from the repeated expansion and contraction of the Li anodes. Here, it is reported that high-performance SSBs are enabled by constructing brick-and-mortar electrolytes that can dynamically adapt to the interface changes during cycling. An electrolyte film with a high mechanical strain (250%) is fabricated by filling viscoelastic (600% strain) and piezoelectric block-copolymer electrolytes (mortar) into a mixed conductor Li0.33 La0.56 TiO3-x nanofiber film (brick). During Li-plating, the electrolytes can homogenize the interfacial electric field and generate piezoelectricity to promote uniform Li-deposition, while the mortar can adhere to the Li-anode without interfacial disintegration in the reversed Li-stripping. As a result, the electrolytes show excellent compatibility with the electrodes, leading to a long electrochemical cyclability at room temperature. The symmetrical Li//Li cells run stably for 1880 h without forming dendrites, and the LiFePO4 /Li full batteries deliver high coulombic efficiency (>99.5%) and capacity retention (>85%) over 550 cycles. More practically, the pouch cells exhibit excellent flexibility and safety for potential practical applications.
Liu et al. (Fri,) studied this question.