Key points are not available for this paper at this time.
To achieve carbon neutrality in the EU, it is important to renovate the existing EU residential buildings for a higher building energy efficiency. This study examines the impacts of several novel renovation technologies on energy consumption, CO2 emissions and indoor climates in southern European residential buildings through building-level simulations. Three typical residential buildings in South Europe were chosen as the demo buildings to implement the novel technologies. The technologies were classified into passive, ventilation and generation packages, and then simulated independently under the intermittent and continuous heating schedules. Additionally, two final combinations of renovation technologies were also simulated to demonstrate the maximum energy and CO2 emissions reduction potential of the demo buildings. All novel retrofit technologies manifested obvious effects on the energy consumption and CO2 emissions. Nevertheless, the effects were significantly affected by the heating schedule. When the intermittent heating schedule was switched to the continuous heating schedule, the relative energy conservation and CO2 emissions reduction potential of the thermal insulation improvement measures (e.g., bio-aerogel thermal insulation) increased, while those of the generation measures (e.g., solar assisted heat pump) diminished. Renovation with the final combinations reduced the primary energy consumption by up to 66%, 74% and 65% in the continuously heated Greek, Portuguese and Spanish demo buildings, the corresponding CO2 emissions reductions of which were 65%, 75% and 74%, respectively.
Wang et al. (Sat,) studied this question.