This review presents recent results focused on immobilization of zeolites onto inexpensive aluminum substrate using plasma electrolytic oxidation (PEO) processing in various electrolyte solutions applying different electrical regimes. PEO is recognized as a useful technique for the formation of oxide coatings with photocatalytic properties on various metals and alloys. Thin film photocatalysts are more practical than powder/nanoparticle photocatalysts because the photocatalyst does not need to be filtered/separated after the wastewater degradation treatment, which is an expensive and time-consuming process. Addition of zeolites to supporting electrolyte solutions influences structural, morphological and chemical properties of formed oxide coatings. Furthermore, introduction of zeolites loaded with cerium through an ion-exchange procedure is investigated. It is shown that the addition of both parent zeolites and Ce-exchanged zeolites is beneficial for photocatalytic decomposition of model organic pollutant (methyl orange). The most promising results are obtained under ultra-low duty cycle electrical conditions with Ce-exchanged 13X zeolite added to the electrolyte, where about 60% of the model organic pollutant is decomposed during 6 h of treatment under simulated sunlight irradiation (16,000 lx) for 3 cm2 surface area of sample exposed to irradiation.
Mojsilović et al. (Wed,) studied this question.