This work presents a comparative study of micro- and nano-scale fillers in liquid composite molding processes, focusing on how particle size and morphology affect resin rheology, flow behavior, and filler filtration within fiber preforms. Glass microspheres and organo-modified montmorillonite were dispersed in epoxy resin and injected through glass-mat preforms at different fiber volume fractions (ranging from 0.27 to 0.47). Our study integrates rheological characterization, in situ flow-front tracking, unsaturated permeability analysis, thermogravimetric quantification of retained particles, and microstructural observations by SEM. Despite their smaller loading, nanoclay suspensions showed a markedly higher viscosity increase than microsphere systems, yet their permeability remained nearly unchanged. In contrast, microsphere-filled resins exhibited strong filtration at the flow inlet, density-driven settling near the lower tool face, and significant permeability loss. The results demonstrate that nano-fillers, although more viscous, maintain homogeneous distribution and flow continuity, whereas micro-fillers promote cake formation and local compaction. This controlled side-by-side comparison clarifies how filler size and shape govern filtration mechanisms in liquid composite molding (LCM), providing design guidelines for processing filled resin systems without compromising part quality.
Stocchi et al. (Sun,) studied this question.