Integrated Numerical and Experimental Assessment of Passive Blade Designs for Enhanced Self-Starting in H-Type VAWT Under Low Wind Conditions

The limited self-starting capability of H-type Darrieus Vertical-Axis Wind Turbines (VAWT) remains one of the main obstacles to their deployment in low-power and urban applications, where wind conditions are typically weak and intermittent. Although several passive geometric modification strategies have been proposed to enhance initial torque generation, most available studies rely predominantly on numerical simulations, with limited systematic experimental validation under low tip-speed ratio (TSR) conditions. In this work, the influence of passive blade modifications on self-starting performance is assessed through a combined numerical–experimental approach. An integrated numerical–experimental framework was used to systematically compare passive blade configurations under equivalent low-wind conditions. Two modified configurations, a biomimetic profile incorporating passive trailing-edge devices and an asymmetric J-type geometry, were optimized using transient CFD simulations of the first rotation cycle and a Design of Experiments (DOE) framework. Additively manufactured full-rotor test blades were then manufactured via additive manufacturing and tested in a controlled wind tunnel at 3.0 m/s and 2.25 m/s. Start-up time, azimuthal robustness, tip-speed-ratio evolution, and static start-up torque (interpreted through its corresponding torque coefficient) were measured and compared against a baseline NACA0018 profile. The biomimetic configuration consistently produced higher start-up torque and shorter acceleration times, achieving self-starting in 66.7% of the evaluated azimuthal positions at 2.25 m/s, compared to 22.2% for the baseline profile. Within the investigated operating range, this configuration emerged as the most robust passive strategy. The agreement between CFD predictions and experimental measurements supports the use of first-cycle maximum torque as a representative indicator of self-starting performance. These findings highlight the comparative value of first-cycle maximum torque as a practical metric for passive self-starting design assessment in low-TSR Darrieus turbines. These findings provide direct experimental evidence to guide the rational design of Darrieus turbines intended for marginal wind conditions.