A photogrammetry-based error compensation solution, comprising calibration, positioning compensation and accuracy validation methodologies, is presented to the aerospace sector, able to assist industrial robots in manufacturing new composite materials, offering versatility and reconfigurability at a lower cost than that resulting from the currently used milling machines. Against a ground truth measured by a laser tracker, it has boosted, in real time, the accuracy level from ±0.685 to ±0.203 mm, on average, and from ±1.621 to ±0.498 mm at peak, following the ISO 9283 standard, and from ±0.534 to ±0.080 mm, on average, and from ±1.804 to ±0.456 mm at peak, with a real part in a large volume under industrial operating conditions, taking into account occlusions and showing robustness against the impact of the payload, the waviness, and the backlash.
Alonso et al. (Thu,) studied this question.