Herein, we present the analysis, design, optimization, and fabrication of a broadband, stepped-impedance Wilkinson power divider. The proposed structure employs stepped-impedance transmission lines and open-circuited stubs, achieving a simple and compact implementation while maintaining a wideband frequency response. Initially, transmission-line-based circuit analysis was performed to extract the design equations, followed by simulation and optimization to enhance impedance matching and output-port isolation over a broad bandwidth. Finally, the proposed divider was fabricated using microstrip-line technology, and experimental measurements were conducted using the Agilent E5071C vector network analyzer. The simulation and measurement results showed efficient wideband operation over the 1–4 GHz frequency range. Specifically, the measured return loss at the input port was <−10 dB; the corresponding return loss at the output ports was <−15 dB. The measured insertion loss was −3.73 ± 0.42 dB. The isolation between the output ports was <−10 dB, reaching approximately −30 dB at 2.1 GHz and −25 dB at the center operating frequency (f0 = 2.5 GHz). The amplitude and phase imbalances were 0 ± 0.2 dB and 0o ± 0.8o, respectively. Furthermore, the overall size of the proposed wideband Wilkinson power divider was 0.35λg × 0.21λg. Compared to previous designs, the divider proposed in this study exhibits an improved and more symmetric frequency response, as well as a substantially reduced size, making it suitable for several modern wireless technologies such as Wi-Fi, Bluetooth, GPS, DCS, WCDMA, and sub-6 GHz 5G communication systems.
Tsitsos et al. (Sun,) studied this question.