Ammonium nitrogen (NH4+-N) is a key biogenic pollutant in aquatic systems. This study evaluated natural diatomite (Aktobe region) and zeolite (Shankhanai, Zhetysu region) as low-cost, environmentally benign sorbents for NH4+-N removal, and examined the effects of thermal (200–750 °C; 450 °C selected) and alkaline (0.5 M NaOH) treatments on their structural, textural and adsorption properties. Materials were characterized by XRD, XRF, FTIR, SEM-EDX and adsorption performance was assessed by kinetic and equilibrium experiments. Specific surface area and pore characteristics were determined from low-temperature nitrogen adsorption–desorption measurements, and the specific surface area was calculated using the Brunauer–Emmett–Teller (BET) method. Thermal treatment at 450 °C increased the specific surface area of diatomite (46.3 m2/g) and pore volume, and subsequent alkaline activation further enhanced adsorption activity. The modified diatomite achieved up to 84.6% removal of NH4+-N with an equilibrium capacity qmax = 1.758 mg/g. Adsorption kinetics were best described by the pseudo-second-order (PSO) model, which may indicate a substantive role of surface chemical interactions. Equilibrium data were fitted with Langmuir and Freundlich models: the modified diatomite fitted Langmuir best (R2 = 0.999), which may suggest predominance of a monolayer adsorption mechanism under the studied conditions, whereas natural samples and the zeolite were better described by the Freundlich model, reflecting likely surface energetic heterogeneity. Separation factor values (RL = 0.068–0.643) indicate favorable adsorption within the investigated concentration range. The point of zero charge (pHpzc) was determined for all sorbents (5.3–6.3), confirming that at pH 7 the surface carries a negative charge favorable for electrostatic attraction of NH4+ cations. Reusability tests over five consecutive adsorption–desorption cycles showed that modified diatomite and modified zeolite retained 93.4% and 92.3% of their initial removal efficiency, respectively, indicating acceptable stability under the applied regeneration conditions. These results demonstrate the potential of alkaline-modified diatomite and zeolite as effective sorbents for ammonium removal from wastewaters, contributing to the mitigation of eutrophication risks.
Bizhanova et al. (Mon,) studied this question.