Key points are not available for this paper at this time.
Abstract Zn foil is widely used for studying the stability and dendrite formation behavior of Zn anodes. The reported long cycling life of rechargeable Zn batteries (RZBs) is obtained by testing a battery immediately after its fabrication neglecting the aging effects. The cycling performance demonstrated cannot, however, have practical applications. Using Zn foil as both the working electrode and current collector will cause many problems when the battery is scaled up. A Zn powder (Zn‐P)/current collector configuration is more practical. In this work, the corrosion of the Zn‐P@Cu anode‐induced cell swelling is first quantitatively studied. During the aging process of the Zn‐P@Cu electrode, hydrogen forms on the surface of Cu and the Zn‐P dissolves resulting in morphological changes. These phenomena can be attributed to galvanic corrosion between Cu and Zn. To address this issue, tin with a higher overpotential for hydrogen generation is plated on Cu surface. The results indicate that hydrogen evolution is ameliorated. With a low NP ratio (mass) of 10:7, considerably better storage and cycling performance are achieved for Zn‐P@Cu//MnO 2 . These results highlight the need to focus on the calendar life of RZBs and corrosion of the Zn anode.
Li et al. (Fri,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: