Under ideal trapezoidal back electromotive force (EMF) conditions, a brushless direct current (BLDC) motor can produce constant instantaneous electromagnetic torque when supplied with ideal three-phase square-wave currents. However, this operating mode may result in relatively high copper loss. In practical applications, where both the back-EMF and the current waveforms deviate from their ideal shapes, significant torque ripple is introduced. To address these issues, this paper proposes a maximum torque per ampere (MTPA) control strategy for BLDC motors based on zero-sequence current injection. An improved Park (3s–3r) is employed to develop the mathematical model, in which the synthesized non-zero-sequence components are mapped exclusively onto the q-axis. By properly regulating the d-axis and 0-axis reference currents, the proposed strategy achieves minimum copper loss operation. Based on this framework, a torque control system incorporating zero-sequence current injection is established to further enhance performance. The feasibility and effectiveness of the proposed control strategy are validated through digital signal processing (DSP)-based experimental results.
Zheng et al. (Mon,) studied this question.