Street lighting systems are essential for ensuring nighttime road safety and visibility. The integration of solar photovoltaic (PV) systems into street lighting infrastructure improves energy efficiency and sustainability; however, the mismatch between daytime energy generation and nighttime lighting demand requires effective energy management solutions. In addition, long-distance electrical connections introduce voltage drop constraints, which are often overlooked in conventional design approaches. This study addresses the integration of lighting design, electrical constraints, and techno-economic performance in nanogrid-based LED street lighting systems for secondary roads. A unified framework is developed to evaluate lighting performance, PV–battery sizing, voltage drop behavior, and lifecycle cost under different system architectures. Optimal pole spacing and luminaire ratings are determined using DIALux, while PV–battery configurations are optimized using HOMER Pro based on site-specific solar irradiance. The analysis focuses on voltage drop as the key electrical constraint and examines its impact under decentralized and centralized nanogrid configurations (25%, 50%, and 100%) in both stand-alone and grid-connected modes. The results show that increasing centralization reduces component redundancy but significantly increases cable length, conductor sizing, and infrastructure cost. A techno-economic assessment with lifecycle cost and sensitivity analysis indicates that a 25% centralized configuration reduces total system cost by approximately 23% compared to fully decentralized systems while avoiding excessive cabling costs. These findings demonstrate that voltage drop and electrical infrastructure constraints play a decisive role in determining optimal system design, highlighting the importance of system-level integration rather than isolated optimization of lighting or energy components.
Bunjongjit et al. (Thu,) studied this question.