Seismic design spectra and mapping procedures using hazard analysis based directly on oscillator response

Abstract The calculation of design spectra for building sites threatened by seismic ground motion is approached by considering the maximum responses of linearly elastic oscillators as indicators of ground motion intensity. Attenuation functions describing the distribution of response as a function of earthquake magnitude and distance are derived using 68 components of recorded ground motion as data. With a seismic hazard analysis for several hypothetical building sites, the distributions of maximum oscillator responses to earthquakes of random magnitude and location are calculated, and spectra are drawn to indicate the maximum responses associated with specified probability levels. These spectra are compared to design spectra calculated from published methods of amplifying peak ground motion parameters. The latter spectra are found to be inconsistent in terms of risk for building sites very close and very far from faults. A ground motion parameter defined to be proportional to the maximum response of a 1 Hz, 2 per cent damped linearly elastic oscillator is investigated; this parameter, in conjunction with peak ground acceleration, is found to lead to risk‐consistent design spectra. Through these two parameters, a design earthquake magnitude and design hypocentral distance are defined, for a specified building site and risk level. The use of these parameters in the seismic hazard mapping of a region is illustrated.