The results of a multiscale study of fault and fracture geometry, distribution, density, and intensity are reported for Mesozoic platform carbonates cropping out along the axial zones of the southern Apennines fold-and-thrust belt, Italy. By integrating field structural observations with digital outcrop analysis, the study focuses on Cretaceous limestone rocks exposed along natural creeks and artificial trails of the Castelsaraceno area, Raparo Mt., southern Italy. There, the limestone beds are bounded by mm- to cm-thick marly–clayey interbeds, forming a well-layered succession made up of a few m-thick bed packages bounded by several cm-thick clayish interlayers. The carbonate multilayer was first affected by thrust tectonics, with the formation of low-angle intra-carbonate thrust faults and fault bend-folding. Then, the multilayer was crosscut by extensional–transtensional high-angle faults, which displaced the previously formed contractional structural elements, and allowed carbonate exhumation from shallow crustal depths. At outcrop scales, thrust-related deformation was solved by low-angle joints and veins, rare high-angle stylolites, and low-angle sheared fractures displaying reverse kinematics. Quantitative analyses of fracture density (P20) and intensity (P21) conducted on selected portions of the thrust fault zones indicate that the low-angle joints and veins attain their highest values in the vicinity of the main slip surfaces, whereas they are almost absent in the surrounding carbonate host rocks. Plio-Quaternary transtensional deformation was solved by NW–SE- and NE–SW striking faults. The latter fault set, nicely exposed along the flanks of the Raganello Creek, was characterized by right-lateral components of slip. Incipient faults, with ca. 1 cm throw, are made up of vertically discontinuous slip surfaces, which crosscut single bed packages and abut against clayish interlayers. The slip surfaces form conjugate geometries, and are associated to high-angle fractures and veins striking NE–SW, dissecting the bed packages. The fault core is virtually absent, whereas the damage zones are very discontinuous along dip. The P20 values computed for the high-angle fractures and veins increase toward the slip surfaces, whereas the P21 values remain nearly constant. These data are interpreted as being due to fault nucleation processes associated with fracture nucleation within the limestone rocks. NE–SW striking small faults displaying throws between 10 and 60 cm are comprised of through-going main slip surfaces crosscutting multiple bed packages, and poorly developed, discontinuous fault cores flanked by m-thick damage zones. The damage zones include sub-parallel high-angle shear fractures, fractures and veins showing a positive correlation between P20 and P21, whose values increase in the vicinity of the main slip surfaces. Such a positive correlation is interpreted as due to fault growth by linkage and coalescence of pre-existing high-angle fractures, and formation of fault-related joints and veins at the extensional quadrants of single shear fractures. Similarly, large-scale NE–SW striking mature faults with throws on the order of tens of meters, made up of a m-thick fault core and 10 s of m-thick damage zones including sub-parallel fractures and veins, also show a positive P20 and P21 correlation. The main outputs of this work are synthesized into a conceptual model illustrating the transition from thrust-related deformation to extensional–transtensional faulting, documenting the evolution of fracture networks from incipient-to-small-to-mature faults.
Kyari et al. (Tue,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: