Key points are not available for this paper at this time.
Abstract The influence of the solvent‐evaporation rate on the formation of α and β crystalline phases in solution‐cast poly(vinylidene fluoride) (PVDF) films was systematically investigated. Films were crystallized from PVDF/ N , N ‐dimethylformamide solutions with concentrations of 2.5, 5.0, 10, and 20 wt % at different temperatures. During crystallization, the solvent evaporation rate was monitored in situ by means of a semianalytic balance. With this system, it was possible to determine the evaporation rate for different concentrations and temperatures of the solution under specific ambient conditions (pressure, temperature, and humidity). Fourier‐Transform InfraRed spectroscopy with Attenuated Total Reflectance revealed the β‐phase content in the PVDF films and its dependence on previous evaporation rates. Based on the relation between the evaporation rate and the PVDF phase composition, a consistent explanation for the different amounts of β phase observed at the upper and lower sample surfaces is achieved. Furthermore, the role of the sample thickness has also been studied. The experimental results show that not only the temperature but also the evaporation rate have to be controlled to obtain the desired crystalline phases in solution‐cast PVDF films. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010
Chinaglia et al. (Thu,) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: