Key points are not available for this paper at this time.
In this paper, a new predictive direct torque control (DTC) method is proposed, which improves the dynamic response of the conventional DTC in the transient state and yields the minimum torque and flux ripples in the steady state through an optimal voltage vector. At the steady state, the magnitude, phase, and time duration of the voltage vector are adjusted in a manner where the minimum torque and flux ripples are obtained; whereas in the transient state, the voltage vector parameters are adjusted in a manner where the fastest dynamic response is achieved. The space-vector modulation is used in synthesizing the selected voltage vector where a fixed switching frequency is achieved. In order to improve the control system efficiency, the principle of maximum torque per ampere is adopted in obtaining the commanding stator flux magnitude. To investigate the effectiveness of the proposed method, the steady-state and transient-state performances are tested in MATLAB software and in practice. The simulation and experimental results confirm that the proposed method yields the minimum torque and flux ripples while improving the dynamic response of the conventional DTC. The comparative investigation with an existing predictive DTC method indicates that the proposed method has a better performance in both the steady state and transient state.
Vafaie et al. (Tue,) studied this question.