Key points are not available for this paper at this time.
In this paper, a decision tree regression (DTR)-based fault distance estimation scheme for double-circuit transmission lines is presented. Fault location is estimated using the information obtained from fault events data. The DTR was chosen because it requires less training time, offers greater accuracy with a large data set, and robustness than all other techniques like artificial neural networks, support vector machines, adaptive neurofuzzy inference systems, etc. Hitherto, DT has been used for fault detection/classification, but it has not been used for fault location. Three-phase current and voltage signals measured at one end of the line are used as inputs to a fault-location network. The proposed method does not require a communication link as it uses only one-end measurements. Signals are processed with two signal-processing techniques-discrete Fourier transforms and discrete wavelet transform. A comparative study of both techniques has been carried out to observe the effect of signal processing on the fault-location estimation method. The proposed method is tested on three test systems, namely: 1) the 2-bus; 2) the WSCC-9-bus; and 3) the IEEE 14-bus test systems. The test results confirm that the proposed DTR-based algorithm is not affected by the variation in fault type, fault location, fault inception angle, fault resistance, prefault load angle, SCC, load variation, and line parameters. The proposed scheme is relatively simple and easy in comparison with complex equation-based fault-location estimation methods.
Swetapadma et al. (Mon,) studied this question.