A Nonergodic Ground‐Motion Model for California with Spatially Varying Coefficients

Traditional probabilistic seismic-hazard analysis as well as the estimation of ground-motion models (GMMs) is based on the ergodic assumption, which means that the distribution of ground motions over time at a given site is the same as their spatial distribution over all sites for the same magnitude, distance, and site condition. With a large increase in the number of recorded ground-motion data, there are now repeated observations at given sites and from multiple earthquakes in small regions, so that assumption can be relaxed. We use a novel approach to develop a nonergodic GMM, which is cast as a varying-coefficient model (VCM). In this model, the coefficients are allowed to vary by geographical location, which makes it possible to incorporate effects of spatially varying source, path, and site conditions. Hence, a separate set of coefficients is estimated for each source and site coordinate in the data set. The coefficients are constrained to be similar for spatially nearby locations. This is achieved by placing a Gaussian process prior on the coefficients. The amount of correlation is determined by the data. The spatial correlation structure of the model allows one to extrapolate the varying coefficients to a new location and trace the corresponding uncertainties. The approach is illustrated with the Next Generation Attenuation-West2 data set, using only Californian records. The VCM outperforms a traditionally estimated GMM in terms of generalization error and leads to a reduction in the aleatory standard deviation by similar to 40%, which has important implications for seismic-hazard calculations. The scaling of the model with respect to its predictor variables such as magnitude and distance is physically plausible. The epistemic uncertainty associated with the predicted ground motions is small in places where events or stations are close and large where data are sparse.