Key points are not available for this paper at this time.
The advancement of agriculture and a shortage of labor have led to an increased use of agricultural machinery. However, the resulting environmental issues have prompted a shift from internal combustion engines to electric drivetrains. The electric drivetrain includes the installation of batteries, which can lead to decreased energy efficiency and significant loads on the vehicle due to their heavy weight. Consequently, the importance of ensuring the safety of agricultural machinery is being increasingly emphasized. The load on the frame of agricultural machinery is not consistent during off-road driving, and the accumulation of load cycles can lead to the destruction and failure of components. Therefore, it is necessary to ensure a level of safety and to predict the fatigue life. In this study, we estimate the safety factor and predict the fatigue life of weak points in an electrically driven, multi-purpose cultivation tractor based on working conditions (width, soil, and drive). Strain gauges were attached to these weak points to measure the strain, which was then converted to von Mises stress. Fatigue life was predicted using the rainflow counting method and the Palmgren–Miner rule. The results showed that the safety factor measured under various working conditions was greater than 1. The estimated minimum fatigue life was 124,176 years. Considering that the cultivator is used for 29.7 h annually and has a durability lifespan of 5 years, it is expected to be safely usable throughout its service life.
Hwang et al. (Tue,) studied this question.