As floating offshore wind turbines (FOWTs) scale towards 10 MW+ capacities, suppressing wave-induced rotational resonance becomes critical for system survivability. This study introduces an optimized, highly symmetrical four-float semi-submersible platform, explicitly tailored to support the DTU 10 MW wind turbine and paired with an orthogonal four-point mooring system. Using three-dimensional linear potential flow theory via ANSYS AQWA, comprehensive frequency- and time-domain hydrodynamic evaluations were conducted. To address the inherent limitations of inviscid potential flow assumptions, an empirical added-damping method was implemented. Quantitative results demonstrate a drastic reduction in motion responses: the peak Response Amplitude Operator (RAO) for heave decreased by 68.6% (from 1.945 m/m to 0.610 m/m). Most notably, the peak RAOs for the critical rotational degrees of freedom—pitch and roll—were reduced by over 92% (from 2.080 °/m and 2.216 °/m to ~0.168 °/m, respectively). Ultimately, compared to traditional asymmetric three-float concepts, this novel symmetric omnidirectional layout provides a more uniform restoring stiffness. The resulting suppression of pitch and roll resonance results in a profound reduction in tower-base bending moments and gyroscopic loads, thereby significantly enhancing the dynamic stability, safety margins, and fatigue life of the 10 MW FOWT under extreme survival sea states.
Yang et al. (Tue,) studied this question.