Key points are not available for this paper at this time.
We report on the effect of TiO2 film thickness on the charge transport, recombination, and device characteristics of perovskite (CH3NH3)PbI3 sensitized solar cells using iodide-based electrolytes. (CH3NH3)PbI3 is relatively stable in a nonpolar solvent (e.g., ethyl acetate) with a low iodide concentration (e.g., 80 mM). Frequency-resolved modulated photocurrent/photovoltage spectroscopies show that increasing TiO2 film thickness from 1.8 to 8.3 μm has little effect on transport but increases recombination by more than 10-fold, reducing the electron diffusion length from 16.9 to 5.5 μm, which can be explained by the higher degree of iodide depletion within the TiO2 pores for thicker films. The changes of the charge-collection and light-absorption properties of (CH3NH3)PbI3 sensitized cells with varying TiO2 film thickness strongly affect the photocurrent density, photovoltage, fill factor, and solar conversion efficiency. Developing alternative, compatible redox electrolytes is important for (CH3NH3)PbI3 or similar perovskites to be used for potential photoelectrochemical applications.
Zhao et al. (2013) studied this question.