Developing a Chained Simulation Method for Quantifying Cooling Energy in Buildings Affected by the Microclimate of Avenue Trees

This paper introduces a methodology aimed at bridging the gap between building energy simulation and urban climate modeling. A coupling method was developed through the Building Control Virtual Test Bed (BCVTB) and applied to a case study in Taipei City, Taiwan, to address the microclimate factors of street trees crucial to cooling energy consumption. The use of the Urban Weather Generator for weather file modification revealed a 0.63 °C average air temperature disparity. The coupling method emphasized the importance of accurate wind speed and convective heat transfer coefficients (CHTCs) on building surfaces in determining cooling energy. The results indicated that elevated CHTC values amplify heat exchange, with higher wind velocities playing a crucial role in heat dissipation. The presence of street trees was found to significantly reduce heat flux penetration, leading to a reduction in building surface temperatures by as much as 9.5% during hot months. The cooling energy was lowered by 16.7% in the BCVTB simulations that included trees compared to those without trees. The EnergyPlus-only simulations underestimated the cooling energy needs by approximately 9.3% during summer months. This research offers valuable insights into the complex interactions between buildings and their environments. The results highlight the importance of trees and shading in mitigating the heat island effect and improving energy-efficient urban planning.