Design of Adaptive Grippers for Fruit-Picking Robots Considering Contact Behavior

Adaptability to unstructured objects and the avoidance of target damage are critical challenges for flexible grippers in fruit-picking robots. Most existing flexible grippers have many problems in terms of control complexity, stability and cost. This paper proposes a flexible finger design method that considers contact behavior. The new approach incorporates topological design of contact targets and introduces contact stress constraints to directly obtain a flexible finger structure with low contact stress and good adaptability. The study explores the effects of design parameters, including virtual spring stiffness, volume fraction, design domain size, and discretization, on the outcomes of the flexible finger topology optimization. Two flexible finger structures were selected for comparative analysis. The experimental results verified the effectiveness of the design method and the maximum contact stress was reduced by about 70%. An adaptive two-finger gripper was developed. This design allows the gripper to achieve damage-free grasping without additional sensors and control systems. The adaptive and contact performances of the grippers with different driving modes were analyzed. Practical grasping tests were also performed, including evaluation of adaptive performance, stability, and maximum grasping weight. The results indicate that gripper 2 with flexible finger 2 excelled in contact stress and adaptive wrapping, making it well-suited for grasping unstructured and fragile objects. This paper provides valuable insights for the design and application of flexible grippers for picking robots, offering a promising solution to enhance adaptability while minimizing target damage.