The Europa Thermal Emission Imaging System (E-THEMIS) Investigation for the Europa Clipper Mission

Abstract The Europa Thermal Emission Imaging System (E-THEMIS) on the Europa Clipper spacecraft will investigate the temperature and physical properties of Europa using thermal infrared (TIR) images in three wavelength bands centered from 7-14 μm, 14-28 μm and 28-80 μm. E-THEMIS will map >80% of the surface Europa at multiple times of day at a resolution of 8-km per pixel, ∼32% percent of the surface at ≤1 km/pixel resolution, and ∼6% percent at ≤100 m/pixel resolution. The specific objectives of the investigation are to 1) understand the formation of surface features, including sites of recent or current geologic activity, in order to understand regional and global processes and evolution and 2) to identify safe sites for future landed missions. E-THEMIS uses an uncooled microbolometer detector array for the IR focal plane. The E-THEMIS focal plane has 920 cross-track pixels (896 active) and 140 along-track pixels in each of the three spectral bands. The image data are collected at 14-bits per pixel at a frame rate of 60 Hz. The instrument can operate in framing mode, where full frame images are collected, and optionally co-added in time, in each band, or in time-delay-integration (TDI) mode where consecutive rows from each band are offset spatially to remove the spacecraft motion and then summed. In addition, the data in each band can be spatially aggregated from 2 × 2 to 5 × 5 pixels. These modes will be varied throughout each Europa flyby to optimize the data precision while fitting within the E-THEMIS data allocation. The expected temperature precision, measured as the noise equivalent spectral radiance, is 1.2 K at scene temperatures ≥90 K for a TDI of 16 with 4 × 4 pixel coaggregation in Band 2. The absolute accuracy at 90 K is 2−3 K in Band 2. E-THEMIS is an all-reflective, three-mirror anastigmat telescope with a 6.45-cm effective aperture and a speed of f/1.34 cross-track and 1.92 along-track. The mass of instrument Sensor Assembly, mounted on the spacecraft nadir deck, is 11.4 kg, the vault electronics are 1.8 kg, and the two are connected through a 3.1 kg harness. The Sensor volume is 23.7 cm x 31.8 cm x 29.8 cm. E-THEMIS consumes an average operation power of 34.8 W at 28 V. E-THEMIS was developed by Arizona State University with Raytheon Vision Systems developing the microbolometer focal plane assembly and Ball Aerospace developing the electronics. E-THEMIS was integrated, tested, and radiometrically calibrated on the Arizona State University campus in Tempe, AZ.