Predicting Weld Quality in Duplex Stainless Steel Butt Joints during Laser Beam Welding: A Hybrid DNN-HEVA Approach

Duplex stainless steel (DSS) welding is critical for producing structures and components in a variety of industries. Because traditional optimization approaches cannot manage the complexity of welding, additional solutions must be investigated. This study addresses the need for a systematic exploration of the welding parameters affecting the quality and performance of DSS butt joints, specifically employing fiber laser welding. This study focuses on butt joints in UNS S32304 and 304L using a fiber laser. Welding process parameters were systematically varied, including laser power, scanning speed, beam diameter, and focal position. To efficiently examine the parameters in the design space, the response surface methodology (RSM) with Box–Behnken design (BBD) was used. The combination of the specific parameter values used in the 7th run (Laser Power: 1600 W, Scanning Speed: 2000 mm/min, Beam Diameter: 1.5 Formula: see textm, Focal Position: 30 mm) led to better yield point stress (YPS), maximum tensile stress (MTS), break stress (BS) and reduction in area (RA). ANOVA and lack of fit analysis confirmed the significance of the experiment. In particular, the selected welding parameters significantly influenced all responses. A hybrid machine learning method of deep neural network (DNN) and human eye vision algorithm (HEVA) was used for predicting weld quality during laser beam welding (LBW). The hybrid DNN-HEVA consistently outperformed other optimization methods (RSM-BBD, FNN, CNN, and RNN) across key welding quality parameters. High Formula: see text 2 values (0.9922, 0.9962, 0.9983, and 0.9907) indicated a strong correlation between predicted and actual values for all calculated responses. Lower RMSE, MSE, and MAE values were also highlighted in the precision of predicted values to the experimental data.