Identification of prevalent leachate percolation of municipal solid waste landfill: a case study in India

Abstract Landfill leachate forms when waste-inherent water and percolated rainfall transfer are highly toxic, corrosive, acidic, and full of environmental pollutants. The release of leachate from municipal solid waste (MSW) landfill sites poses a severe hazard to human health and aquatic life. This study examined the impact of leachate from Delhi’s Ghazipur landfill on the nearby groundwater quality. Analysis of leachate samples was done to determine various parameters such as total dissolved solids (TDS), hardness, alkalinity, electrical conductivity, pH, BOD 5 , COD, nitrate, sulphate, chloride and iron, and presence of coliform bacteria. Significant dissolved elements (22,690–34,525 mg/L) were observed in the samples, indicated by the high conductivity value (1156–1405 mho/cm). However, a stable pH range (6.90–7.80) of leachate samples was observed due to high alkalinity concentrations between 2123 and 3256 mg/L. The inverse distance weighing (IDW) interpolation tool from QGIS 3.22.7 developed spatial interpolated models for each parameter across the Ghazipur area. The IDW interpolated graphs of various parameters over the whole study area confirmed these contaminations. In addition, leachate and groundwater samples were physio-chemically analyzed, and temporal fluctuation in landfill waste has also been studied. The temporal fluctuation results showed that when heat is produced, transmitted, and lost throughout the waste system, the maximum temperature position fluctuates over time. The findings of this study highlight the critical importance of landfill management in reducing groundwater contamination from MSW leachate.