Investigating the formability of 6061-T6 aluminum alloy sheets at elevated temperatures using experimental and numerical methods

The high weight-to-strength ratio of AA6061 aluminum alloys presents increased potential applications in industries such as automotive and aircraft. However, its limited formability at room temperature (RT) restricts its usage. Therefore, in the conducted study, the formability of AA6061-T6 sheets with a thickness of 2 mm was investigated at different temperatures in the range of RT up to 300°C. Both experimental and numerical methods were employed to investigate the forming limit diagram (FLD) of an AA6061-T6 sheet. The tests were conducted using a non-isothermal Nakajima standard die under dry contact conditions. Two damage criteria, the Johnson–Cook and the ductile fracture criterion (DFC), were used in a thermomechanically coupled finite element analysis in Abaqus/Explicit to predict fracture in the AA6061 sheet. To examine the impact of temperature on the friction coefficient in the punch and sheet contact, an atomic force microscope was used to measure the roughness of the sheet, after the FLD tests, were conducted at different temperatures. Results indicate an increase in FLD levels from RT up to 100°C, followed by a decrease, for temperatures surpassing 100°C. Experimental findings underscored the significance of the adhesive wear at elevated temperatures, acting as a decisive factor that hampers the material flow and the sheet deformation, in the contact between the sheet and punch.