The increase in population and demand for the various needs of citizens increases the interaction with the geo-environment. Thus, the rate of natural events affecting daily human life increases. Such an event occurred on a rock cliff in a densely populated area in İstanbul (Türkiye). More than four rock blocks (approximately 3–5 m3) belonging to the Paleozoic sequence of İstanbul, composed of nodular limestone with sandy-clay interlayers, detached and fell. The blocks traveled along a path of approximately 60 m and stopped by crushing a couple of buildings downslope. The path was rough and contained various surface conditions (e.g., bedrock, talus, and plants). This study was initiated by the examination of the dimensions of failed rock blocks, their paths, and topographic conditions. Unmanned vehicles (drones) facilitated the generation of 3D numerical models of topographic changes on the site. Quantifying discontinuity properties (such as persistence, spacing, roughness, etc.) and defining weathering properties comprises the second stage, along with sampling. Based on digital topographic data and field observations, cross-sections were defined by means of possible rockfall areas within the area of potentially unstable blocks. Numerical analysis and rockfall analysis were conducted along these critical sections. Interpretation of laboratory data and results obtained from numerical studies leads to an understanding of the mechanism of the recent rockfall event and demonstrates the most critical areas to be considered and reinforced. The research comprises proposing appropriate reinforcement techniques due to the strong Turkish regulations along the “Bosphorus Waterfront Protected Zone”. The study advises pre-cleaning of potentially unstable blocks after a fence production on paths where rocks could fall, and rock anchors in some localities with varying lengths. The latest part of the research covers the re-assessment of mitigation processes with numerical models, which shows that the factor of safety increased to the desired levels. The reinforcement applications at the site match well with the proposed prevention methods.
Undul et al. (Tue,) studied this question.