Multilayer laminated composites consisting of high-chromium cast iron (HCCI) powder clad with low-carbon steel (LCS) were fabricated via multi-pass hot rolling at a deformation of 70% under three different temperatures: 1100 °C, 1150 °C, and 1200 °C. The microstructure, elemental diffusion, and mechanical properties of the samples processed at these temperatures were systematically investigated. The results indicate that effective metallurgical bonding was achieved between the HCCI powder and the LCS matrix, with the HCCI regions accumulating high strain energy and dislocation density. Hardness testing demonstrated that higher rolling temperatures lead to increased hardness. The dominant wear mechanism was identified as dry sliding wear. The relatively low content of retained austenite contributed to a reduction in tensile strength, while this microstructure further promoted abrasive wear through the spalling of carbides. These findings suggest that hot processing offers a feasible pathway for improving the wear resistance of HCCI-based composites.
Xing et al. (Tue,) studied this question.