The article presents the possibilities of integrating artificial intelligence (through specific machine learning techniques) in the design and construction process of a battery in order to optimize its thermal management. The workflow starts from CFD thermal simulations (1C-rate) of a battery (16 Li-ion cells, type 18650, 4 × 4 arrangement), and based on the results, a complex thermal landscape is created through radial basis function (Rbf) interpolation. Furthermore, a robust neural network (NN) model is proposed and validated through the obtained performances, which is used further for the optimization of the design space (DSO) and multi-objective optimization (MOO) processes. The obtained results show that for DSO, a cell spacing of 1.37 mm is proposed for a maximum cell temperature of 25.53 °C, and in the case of MOO, a cell spacing of 2.64 mm (for minimum fan energy consumption). The main conclusion of the obtained results shows that the use of the NN model as a surrogate (the Digital Twin of a physical model) presents two great advantages in the process of designing a battery: running a CFD simulation for each point on the 2D grid would take hours, while the NN model can generate the entire map and find the optimum in less than 2 s, and moreover, thousands of additional points can be evaluated to find the thin limit of optimal models, effectively filtering out thousands of energy-consuming “suboptimal” configurations.
Mariasiu et al. (Mon,) studied this question.