Perfluoroalkyl and polyfluoroalkyl substances (PFASs) have become a global environmental concern due to their extreme persistence and toxicity. In this study, perfluorooctanoic acid (PFOA) was removed from aqueous solutions using porous carbon adsorbents synthesized from peach stones. The novelty of this work lies in the development of a procedure for obtaining a suitable carbon adsorbent, whose properties are consistent with the properties of the adsorbate. An appropriate activation was used, allowing the preparation of an adsorbent with a highly developed porous texture and a large surface area, which is a prerequisite for a significant adsorption capacity of the obtained adsorbents towards PFOA. Both carbon adsorbents obtained from peach pits, with clearly different surface chemistry—KOH-activated carbon (ACKOH) and its nitric acid-oxidized derivative (ACHNO3)—for PFOA adsorption were compared, along with the clarification of the relationship between the graphitic structure, pore development, surface functionality and adsorption characteristics. The first adsorbent was produced by chemical activation with KOH at 800 °C, while the second was obtained by oxidative modification of the activated sample with 12% HNO3. Characterization by Raman spectroscopy, SEM, and nitrogen physisorption revealed a highly graphitized structure (ID/IG = 0.86) and well-developed porosity. Adsorption experiments were carried out at PFOA concentrations from 8 to 40 µmol/L using a spectrophotometric method based on methylene blue ion-pair extraction into chloroform. The results showed that ACKOH exhibited a high maximum adsorption capacity of 1660 µmol/g (687.36 mg/g) and followed the Langmuir isotherm model, indicating monolayer adsorption. In contrast, ACHNO3 showed a significantly lower adsorption capacity of 398.36 µmol/g (164.95 mg/g), which was attributed to electrostatic repulsion caused by acidic oxygen-containing surface groups. These findings demonstrate that peach stone-derived activated carbon is a promising, sustainable, and efficient adsorbent for the removal of PFOA from water.
Stoycheva et al. (Sun,) studied this question.